HS-1515 High quality Single color balloon screen printing machine for sale

HS-1515 High quality Single color balloon screen printing machine for sale

Feature:

1.Low Electric Consumption; high efficiency and productivity; easy to operate;

2.Linear movement design;

3.Reliable electrical and pneumatic parts;

4.The squeegee works in two modes---front stop and back stop;

Parameter of this Machine:

Accessories Coming along with the printer:

1 Air compressor: 1.5KW,, Single phase, 220V/ 50Hz, 0.6 Mpa (related pressure)2 Electric Air inflator : 0.35 Kw, Single Phase, 220V/ 50 Hz.

Normally 300 meshes screen is good enough for lates balloons to print. But for other special balloon such as vacuum balloons and adverting balloons, specification of screen can be adjusted according to its image and printing result. The screen frame is stiking silk screen firmly on the frame which generally made by wood or aluminum. The inner size of the frame is totally determinate by the image size, technically, it is necessary to leave space 30mm – 50mm for the image away from the sides of the inner frame, to guarantee the screen flexibility during printing.

The balloon should be inflated enough until it will not be broken for printing, that menas the balloon will not break when the printing frame down and pressed to it for screen printing. To get a good printing result, it s required to make the screen image fully covered on the skin of the inflated balloon. Just let the squeegee/floodbar getting touch with the imaged screen will be enough and so that to avoid the squeegeee/floodbar will slit the screen once the printing pressure more over, as the inflated balloon will force the scren bumping backward.

He latex ink or the rubber ink is recommended, It is necessary to add the solvent or thinner against the inks by 10%-12% if they are too sticky on The screen .